四种金属离子亲和层析纯化重组戊型肝炎病毒包涵体的效果比较

目的 选择固相金属亲和层析柱的金属离子,以优化分离纯化重组戊型肝炎病毒包涵体的条件。方法 在同一试验条件下用4种金属离子柱分离纯化目的蛋白。结果 包涵体经不同离子柱层析时目的蛋白的收获率、纯度、洗脱条件各异。结论 镍离子柱纯化效果最佳。     

Sintering of Ceria-Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air

Amorphous CeO₂–ZrO₂ gels were prepared by coprecipitation in ammonia solutions. The onset of crystallization of the gels, from calcining in air, was 420°C, while 200° to 250°C in the presence of water and organic solvents such as methanol and ethanol. The sintering behaviors of CeO₂–ZrO₂ powders were sensitive to the crystallizing conditions, since hard agglomerates formed when the precipitated gels were crystallized by normal calcination in air, whereas soft agglomerates formed when they were crystallized in water or organic solvents. CeO₂–ZrO₂ powders crystallized in methanol and water at 250°C were sintered to full theoretical density at 1150° and 1400°C, respectively, whereas that crystallized by calcination in air at 450°C was sintered to only 95.2% of theoretical density, even at 1500°C.     

聚醚二醇钾盐引发D．L－丙交酯的开环聚合研究

以聚乙二醇－４０００钾盐为引发剂．合成了食不同长度聚醚链段的聚Ｄ．Ｌ－乳酸－聚乙二醇－聚Ｄ．Ｌ－乳酸（ＰＬＡ－ＰＥＧ－ＰＬＡ）三嵌段共聚物。考察了溶剂用量、引发剂用量、反应温度和时间、ＰＥＧ分子量、不同溶剂对聚合反应的影响。以１Ｈ－ＮＭＲ、ＩＲ、ＤＳＣ、ＧＰＣ对共聚物进行了表征。     

SBS and SEBS block copolymers as impact modifiers for polypropylene compounds

Blends of polypropylene (PP) and thermoplastic elastomers (TPE), namely SBS (styrene‐butadiene‐styrene) and SEBS (styrene‐ethylene/1‐butene‐styrene) block copolymers, were prepared to evaluate the effectiveness of the TPE type as an impact modifier for PP and influence of the concentration of elastomer on the polymer properties. Polypropylene homopolymer (PP‐H) and ethylene–propylene random copolymer (PP‐R) were evaluated as the PP matrix. Results showed that TPEs had a nucleating effect that caused the PP crystallization temperature to increase, with SBS being more effective than SEBS. Microstructure characterization tests showed that in most cases PP/SEBS blends showed the smallest rubber droplets regardless of the matrix used. It was seen that SEBS is a more effective toughening agent for PP than SBS. At 0°C the Izod impact strength of the PP‐H/SEBS 30% b/w blend was twofold higher than the SBS strength, with the PP‐R/SEBS 30% b/w blend showing no break. A similar behavior on tensile properties and flexural modulus were observed in both PP/TPE blends. Yield stress and tensile strength decreased and elongation at break increased by expanding the dispersed elastomeric phase in the PP matrix. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 254–263, 2005     

二氧化氯催化氧化处理活性艳红染料废水催化剂的制备与应用

研究了二氧化氯催化氧化用催化剂的制备条件与催化剂性能。实验结果表明，在工业催化剂载体上负载Cu^2+活性组分的催化剂制备优化条件为：w(Cu²⁺)=6%，焙烧温度500 ℃，焙烧时间4 h。用此催化剂进行二氧化氯催化氧化处理COD为2 700 mg·L^-1的活性艳红染料配制废水时，COD去除率达75%；催化剂寿命与再生实验表明，该方法在技术与经济上都具有较强实用性。     

Electrochemical characteristics of phase-separated polymer electrolyte based on poly(vinylidene fluoride-co-hexafluoropropane) and ethylene carbonate

A polymer electrolyte based on microporous poly(vinylidene fluoride-co-hexafluoropropane) (PVdF-HFP) film was studied for use in lithium ion batteries. The microporous PVdF-HFP (Kynar 2801) matrix was prepared from a cast of homogeneous mixture of PVdF-HFP and solvents such as ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate (EMC). After evaporation of DMC and EMC, a sold film of the PVdF-HFP and the EC mixture was obtained. EC-rich phase started its formation in the PVdF-HFP/EC film at EC content of about 60 wt.% based on the total weight of PVdF-HFP and EC. The formation of the new phase resulted in the abrupt increase of the porosity of the PVdF-HFP matrix from 32 to 62%. The ionic conductivity of the film soaked in 1 M LiPF₆-EC/DMC=1/1 was significantly increased from order of 10⁻⁴ S/cm to order of 10⁻³ S/cm at the EC content of 60 wt.%. Thermal and spectroscopic investigations showed that most of the EC interact with PVdF-HFP with the EC content being below 60 wt.%. MCMB/polymer electrolyte/LiCoO₂ cells employing the microporous PVdF-HFP polymer film showed stable charging/discharging characteristics at 1C rate and good rate capability.     

Crystallization kinetics of low‐density polyethylene and polypropylene melt‐blended with a low‐Tg tin‐based phosphate glass

The nonisothermal and isothermal crystallizations of low‐density polyethylene (LDPE) and polypropylene (PP) in phosphate glass (Pglass)–polymer hybrid blends were studied through differential scanning calorimetry (DSC). As the Pglass volume fraction was increased, the percentage crystallinity decreased. The half‐time for crystallization decreased as the propagation rate constant rose, for both of the polymer matrices, with increasing Pglass concentrations. The Pglass was observed to be a nucleating agent for formation of two‐ or three‐dimensional spherulites in the hybrids. Tensile modulus improved for both of the Pglass–polymer hybrids up to 40% Pglass, but the energy to break decreased. Tensile strength changed slightly with the addition of Pglass to the LDPE matrix, exhibiting a larger value than that of pure LDPE at 30%. The tensile strength decreased as more Pglass was added to the PP matrix. The observed differences between tensile properties of the Pglass–PP and Pglass–LDPE hybrids at identical Pglass volume concentration were found to be consistent with that of the crystallization behavior of the hybrids. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3445–3456, 2003     

硫硒化镉大红釉的研究

综述了硫硒化镉大红釉的研究状况，分析了各种充硒化镉釉制备方法的优缺点。提出了独特的硫硒化镉系列色釉的制备工艺－－多熔块反应法。     

全生物降解PBS的扩链改性研究

采用新型扩链剂2,2′-双(2-噁唑啉)(BOZ)对聚丁二酸丁二醇酯(PBS)进行扩链,研究了BOZ加入量、稳定剂加入量、时间、温度对扩链反应的影响。结果表明,选择最佳条件,扩链后的PBS的相对分子质量较未扩链PBS的相对分子质量大为增加,而且扩链PBS相对分子质量分布与未扩链PBS基本一致,说明PBS扩链后的线性度与起始PBS相同,没有支化或交联反应发生。     

基于Android的会议终端

为满足会议系统对设备小型、智能、方便运输、易于拓展的要求,设计并实现了一种基于Android的会议终端。终端采用可扩展标记语言（ XML）文件定义用户界面,实现界面逻辑与业务逻辑分离,具有很强的自适应性;采用跨平台的Socket通信方式和JSON数据交换语言与服务器进行通信,并结合使用UDP和TCP协议,实现了终端与服务器的松耦合;终端设置项少,无须录入会议内容,简化了用户操作;利用Android内置的SQLite数据库保存会议信息和结果,使数据管理简单高效。阐述了终端的整体设计,给出了终端程序的模块划分和流程。实验表明,终端工作流畅稳定,运行无明显延时,可以为现代会议提供优质的服务。